Flanged Units

UCFS3 Series Square Flange Units with Spigot

Name: Logass Trade Centre
Address: Room No. 36, 163 Narayan Dhuru Street, Maskati Building, 4th Floor, Mumbai, Maharashtra, 400003, IN
Telephone: +91 8369255108
Price range: ₹₹

Four-bolt square flange housing with a spigot (register) for accurate location in a bore, with a set screw insert bearing in a cast iron housing. Shaft sizes 60mm – 140mm; each size is listed with its dimensions below.

Bore range: 60mm – 140mmLocking type: Set screwHousing: Cast ironBrands: NTN, FAG, SKF, FYH, Asahi, DTC, SLS

Dimensions & Part Numbers

Shaft Dia. (mm)	Unit Number	L (mm)	J (Bolt Hole Spacing) (mm)	A2 (mm)	N (Bolt Hole Dia.) (mm)	A3 (mm)	A1 (mm)	A (mm)	H3 (mm)	A0 (mm)	B (Inner Ring Width) (mm)	S (mm)	Bolt Size
60	UCFS312	195	150	19	23	14	22	56	160	78	71	26	M20
65	UCFS313	208	166	15	23	18	22	58	175	78	75	30	M20
70	UCFS314	226	178	18	25	18	25	61	185	81	78	33	M22
75	UCFS315	236	184	21	25	18	25	66	200	89	82	32	M22
80	UCFS316	250	196	18	31	20	27	68	210	90	86	34	M27
85	UCFS317	260	204	24	31	20	27	74	220	100	96	40	M27
90	UCFS318	280	216	24	35	20	30	76	240	100	96	40	M30
95	UCFS319	290	228	39	35	20	30	94	250	121	103	41	M30
100	UCFS320	310	242	39	38	20	32	94	260	125	108	42	M33
105	UCFS321	310	242	39	38	20	32	94	260	127	112	44	M33
110	UCFS322	340	266	35	41	25	35	96	300	131	117	46	M36
120	UCFS324	370	290	35	41	30	40	110	330	140	126	51	M36
130	UCFS326	410	320	35	41	30	45	115	360	146	135	54	M36
140	UCFS328	450	350	45	41	30	55	125	400	161	145	59	M36

Dimensions and part numbers per manufacturer technical catalogue; confirm the exact unit and brand with us before ordering.

Inch Shaft Sizes

The same UCFS3 housings are also supplied with inch-bore insert bearings. The unit number carries a suffix for the shaft size (for example -104 is 1-1/4 inch), and the housing dimensions are the same as the metric unit in the table above.

Shaft Dia. (in)	Unit Number	L (mm)	J (Bolt Hole Spacing) (mm)	A2 (mm)	N (Bolt Hole Dia.) (mm)	A3 (mm)	A1 (mm)	A (mm)	H3 (mm)	A0 (mm)	B (Inner Ring Width) (mm)	S (mm)	Bolt Size
2-1/4 in (57.2 mm)	UCFS312-204	195	150	19	23	14	22	56	160	78	71	26	M20
2-5/16 in (58.7 mm)	UCFS312-205	195	150	19	23	14	22	56	160	78	71	26	M20
2-3/8 in (60.3 mm)	UCFS312-206	195	150	19	23	14	22	56	160	78	71	26	M20
2-7/16 in (61.9 mm)	UCFS312-207	195	150	19	23	14	22	56	160	78	71	26	M20
2-1/2 in (63.5 mm)	UCFS313-208	208	166	15	23	18	22	58	175	78	75	30	M20
2-9/16 in (65.1 mm)	UCFS313-209	208	166	15	23	18	22	58	175	78	75	30	M20
2-5/8 in (66.7 mm)	UCFS314-210	226	178	18	25	18	25	61	185	81	78	33	M22
2-11/16 in (68.3 mm)	UCFS314-211	226	178	18	25	18	25	61	185	81	78	33	M22
2-3/4 in (69.9 mm)	UCFS314-212	226	178	18	25	18	25	61	185	81	78	33	M22
2-13/16 in (71.4 mm)	UCFS315-213	236	184	21	25	18	25	66	200	89	82	32	M22
2-7/8 in (73 mm)	UCFS315-214	236	184	21	25	18	25	66	200	89	82	32	M22
2-15/16 in (74.6 mm)	UCFS315-215	236	184	21	25	18	25	66	200	89	82	32	M22
3 in (76.2 mm)	UCFS315-300	236	184	21	25	18	25	66	200	89	82	32	M22
3-1/16 in (77.8 mm)	UCFS316-301	250	196	18	31	20	27	68	210	90	86	34	M27
3-1/8 in (79.4 mm)	UCFS316-302	250	196	18	31	20	27	68	210	90	86	34	M27
3-3/16 in (81 mm)	UCFS316-303	250	196	18	31	20	27	68	210	90	86	34	M27
3-1/4 in (82.6 mm)	UCFS317-304	260	204	24	31	20	27	74	220	100	96	40	M27
3-5/16 in (84.1 mm)	UCFS317-305	260	204	24	31	20	27	74	220	100	96	40	M27
3-7/16 in (87.3 mm)	UCFS317-307	260	204	24	31	20	27	74	220	100	96	40	M27
3-7/16 in (87.3 mm)	UCFS318-307	280	216	24	35	20	30	76	240	100	96	40	M30
3-1/2 in (88.9 mm)	UCFS318-308	280	216	24	35	20	30	76	240	100	96	40	M30
3-5/8 in (92.1 mm)	UCFS319-310	290	228	39	35	20	30	94	250	121	103	41	M30
3-11/16 in (93.7 mm)	UCFS319-311	290	228	39	35	20	30	94	250	121	103	41	M30
3-3/4 in (95.3 mm)	UCFS319-312	290	228	39	35	20	30	94	250	121	103	41	M30
3-13/16 in (96.8 mm)	UCFS320-313	310	242	39	38	20	32	94	260	125	108	42	M33
3-7/8 in (98.4 mm)	UCFS320-314	310	242	39	38	20	32	94	260	125	108	42	M33
3-15/16 in (100 mm)	UCFS320-315	310	242	39	38	20	32	94	260	125	108	42	M33
4 in (101.6 mm)	UCFS320-400	310	242	39	38	20	32	94	260	125	108	42	M33

Request Quote for UCFS3

Typical Applications

Applications needing a located bore fit
Machine frames and end plates
Fans and mixers
General industrial shafting

Other Flanged Units Series

UCF2 UCF3 UCFX UCFG2 UCFG3 UCFSG3 UCFC2 UCFCX UCFL2 UCFL3 UCFLX UCFLG2 UCFLG3 F-UCFM2 UCFA2 UCFH2 ASFB2 UCFE2 ASPF2 ASRPF2 ASPFL2 ASRPFL2 UELFU2 UELF2 UELFLU2 UELFL2 AELFB2 AELPF2 JELPF2 AELRPF2 AELPFL2 AELRPFL2 JELPFL2

Frequently Asked Questions

What sizes are available in the UCFS3 series?

UCFS3 units are available from 60mm – 140mm bore, as listed in the dimension table below. Each size has its own part number for ordering.

What is the housing material and locking type for UCFS3?

UCFS3 uses a cast iron housing with set screw locking, sourced from NTN, FAG, SKF, FYH, Asahi, DTC and SLS.

What is UCFS3 typically used for?

Common applications include applications needing a located bore fit and machine frames and end plates, and similar general industrial shaft-support duties.

Can’t find your size?

We supply sizes, brands and special versions of mounted bearing units that are not listed on this page. Type the exact size or designation you need and send it to us for a quote.

Need pricing on UCFS3 units?

Share your shaft size and quantity — our technical team will confirm availability and pricing within one business day.

Request Quote Call +91 8369255108