Flanged Units

UCFCX Series Round Flange Units with Spigot (X Series)

Name: Logass Trade Centre
Address: Room No. 36, 163 Narayan Dhuru Street, Maskati Building, 4th Floor, Mumbai, Maharashtra, 400003, IN
Telephone: +91 8369255108
Price range: ₹₹

Round flange housing with a spigot (register) for accurate location in a bore, from the heavier X series, with a set screw insert bearing in a cast iron housing. Both the bolt circle diameter J and the square bolt-hole spacing J1 are listed. Shaft sizes 25mm – 100mm; each size is listed with its dimensions and mass below.

Bore range: 25mm – 100mmLocking type: Set screwHousing: Cast ironBrands: NTN, FAG, SKF, FYH, Asahi, DTC, SLS

Dimensions & Part Numbers

Shaft Dia. (mm)	Unit Number	L (mm)	J (Bolt Circle Dia.) (mm)	J1 (Bolt Hole Spacing) (mm)	A2 (mm)	N (Bolt Hole Dia.) (mm)	A3 (mm)	A1 (mm)	A (mm)	H3 (Spigot Dia.) (mm)	A0 (mm)	B (Inner Ring Width) (mm)	S (mm)	F min (mm)	Bolt Size	Bearing Insert No.	Housing No.	Mass (approx.) (kg)
25	UCFCX05	111	92	65.1	10	9.5	6	24	30	76	38.2	38.1	15.9	46	M8	UCX05	FCX05	1.2
30	UCFCX06	127	105	74.2	8	12	9.5	22.5	32	85	42.9	42.9	17.5	52	M10	UCX06	FCX06	1.7
35	UCFCX07	133	111	78.5	9	12	11	26	37	92	50.2	49.2	19	59	M10	UCX07	FCX07	1.9
40	UCFCX08	133	111	78.5	9	12	11	26	37	92	50.2	49.2	19	63	M10	UCX08	FCX08	2
45	UCFCX09	155	130	91.9	8	14	12	25	37	108	52.6	51.6	19	68	M12	UCX09	FCX09	2.6
50	UCFCX10	162	136	96.2	7	14	16	25	41	118	56.4	55.6	22.2	75	M12	UCX10	FCX10	3.1
55	UCFCX11	180	152	107.5	4	16	22	26	48	127	65.7	65.1	25.4	83	M14	UCX11	FCX11	4.2
60	UCFCX12	194	165	116.7	11	16	20	33	53	140	70.7	65.1	25.4	—	M14	UCX12	FCX12	5.5
65	UCFCX13	194	165	116.7	11	16	20	33	53	140	75.4	74.6	30.2	94	M14	UCX13	FCX13	5.7
70	UCFCX14	222	190	134.4	14	19	20	36	56	164	78.5	77.8	33.3	100	M16	UCX14	FCX14	7.3
75	UCFCX15	222	190	134.4	12	19	22	35	57	164	83.3	82.6	33.3	105	M16	UCX15	FCX15	8
80	UCFCX16	260	219	154.9	10	23	25	36	61	186	86.6	85.7	34.1	113	M20	UCX16	FCX16	12
85	UCFCX17	260	219	154.9	10	23	25	36	61	186	91.3	96	39.7	119	M20	UCX17	FCX17	12
90	UCFCX18	260	219	154.9	12	23	28	43	71	186	101.1	104	42.9	126	M20	UCX18	FCX18	12
100	UCFCX20	276	238	168.3	22	23	28	66	94	206	118.3	117.5	49.2	139	M20	UCX20	FCX20	18

Dimensions and part numbers per manufacturer technical catalogue; confirm the exact unit and brand with us before ordering.

Inch Shaft Sizes

The same UCFCX housings are also supplied with inch-bore insert bearings. The unit number carries a suffix for the shaft size (for example -104 is 1-1/4 inch), and the housing dimensions are the same as the metric unit in the table above.

Shaft Dia. (in)	Unit Number	L (mm)	J (Bolt Circle Dia.) (mm)	J1 (Bolt Hole Spacing) (mm)	A2 (mm)	N (Bolt Hole Dia.) (mm)	A3 (mm)	A1 (mm)	A (mm)	H3 (Spigot Dia.) (mm)	A0 (mm)	B (Inner Ring Width) (mm)	S (mm)	F min (mm)	Bolt Size	Bearing Insert No.	Housing No.	Mass (approx.) (kg)
13/16 in (20.6 mm)	UCFCX05-013	111	92	65.1	10	9.5	6	24	30	76	38.2	38.1	15.9	46	M8	UCX05-013	FCX05	1.2
7/8 in (22.2 mm)	UCFCX05-014	111	92	65.1	10	9.5	6	24	30	76	38.2	38.1	15.9	46	M8	UCX05-014	FCX05	1.2
15/16 in (23.8 mm)	UCFCX05-015	111	92	65.1	10	9.5	6	24	30	76	38.2	38.1	15.9	46	M8	UCX05-015	FCX05	1.2
1 in (25.4 mm)	UCFCX05-100	111	92	65.1	10	9.5	6	24	30	76	38.2	38.1	15.9	46	M8	UCX05-100	FCX05	1.2
1-1/16 in (27 mm)	UCFCX06-101	127	105	74.2	8	12	9.5	22.5	32	85	42.9	42.9	17.5	52	M10	UCX06-101	FCX06	1.7
1-1/8 in (28.6 mm)	UCFCX06-102	127	105	74.2	8	12	9.5	22.5	32	85	42.9	42.9	17.5	52	M10	UCX06-102	FCX06	1.7
1-3/16 in (30.2 mm)	UCFCX06-103	127	105	74.2	8	12	9.5	22.5	32	85	42.9	42.9	17.5	52	M10	UCX06-103	FCX06	1.7
1-1/4 in (31.8 mm)	UCFCX06-104	127	105	74.2	8	12	9.5	22.5	32	85	42.9	42.9	17.5	52	M10	UC207-104	FCX06	1.7
1-5/16 in (33.3 mm)	UCFCX07-105	133	111	78.5	9	12	11	26	37	92	50.2	49.2	19	59	M10	UCX07-105	FCX07	1.9
1-3/8 in (34.9 mm)	UCFCX07-106	133	111	78.5	9	12	11	26	37	92	50.2	49.2	19	59	M10	UCX07-106	FCX07	1.9
1-7/16 in (36.5 mm)	UCFCX07-107	133	111	78.5	9	12	11	26	37	92	50.2	49.2	19	59	M10	UCX07-107	FCX07	1.9
1-1/2 in (38.1 mm)	UCFCX08-108	133	111	78.5	9	12	11	26	37	92	50.2	49.2	19	63	M10	UCX08-108	FCX08	2
1-9/16 in (39.7 mm)	UCFCX08-109	133	111	78.5	9	12	11	26	37	92	50.2	49.2	19	63	M10	UCX08-109	FCX08	2
1-5/8 in (41.3 mm)	UCFCX09-110	155	130	91.9	8	14	12	25	37	108	52.6	51.6	19	68	M12	UCX09-110	FCX09	2.6
1-11/16 in (42.9 mm)	UCFCX09-111	155	130	91.9	8	14	12	25	37	108	52.6	51.6	19	68	M12	UCX09-111	FCX09	2.6
1-3/4 in (44.5 mm)	UCFCX09-112	155	130	91.9	8	14	12	25	37	108	52.6	51.6	19	68	M12	UCX09-112	FCX09	2.6
1-13/16 in (46 mm)	UCFCX09-113	155	130	91.9	8	14	12	25	37	108	52.6	51.6	19	68	M12	UC210-113	FCX09	2.6
1-7/8 in (47.6 mm)	UCFCX10-114	162	136	96.2	7	14	16	25	41	118	56.4	55.6	22.2	75	M12	UCX10-114	FCX10	3.1
1-15/16 in (49.2 mm)	UCFCX10-115	162	136	96.2	7	14	16	25	41	118	56.4	55.6	22.2	75	M12	UCX10-115	FCX10	3.1
2 in (50.8 mm)	UCFCX10-200	162	136	96.2	7	14	16	25	41	118	56.4	55.6	22.2	75	M12	UC211-200	FCX10	3.1
2-1/16 in (52.4 mm)	UCFCX11-201	180	152	107.5	4	16	22	26	48	127	65.7	65.1	25.4	83	M14	UCX11-201	FCX11	4.2
2-1/8 in (54 mm)	UCFCX11-202	180	152	107.5	4	16	22	26	48	127	65.7	65.1	25.4	83	M14	UCX11-202	FCX11	4.2
2-3/16 in (55.6 mm)	UCFCX11-203	180	152	107.5	4	16	22	26	48	127	65.7	65.1	25.4	83	M14	UCX11-203	FCX11	4.2
2-1/4 in (57.2 mm)	UCFCX11-204	180	152	107.5	4	16	22	26	48	127	65.7	65.1	25.4	83	M14	UC212-204	FCX11	4.2
2-5/16 in (58.7 mm)	UCFCX11-205	180	152	107.5	4	16	22	26	48	127	65.7	65.1	25.4	83	M14	UC212-205	FCX11	4.2
2-3/8 in (60.3 mm)	UCFCX12-206	194	165	116.7	11	16	20	33	53	140	70.7	65.1	25.4	—	M14	UCX12-206	FCX12	5.5
2-7/16 in (61.9 mm)	UCFCX12-207	194	165	116.7	11	16	20	33	53	140	70.7	65.1	25.4	—	M14	UCX12-207	FCX12	5.5
2-1/2 in (63.5 mm)	UCFCX13-208	194	165	116.7	11	16	20	33	53	140	75.4	74.6	30.2	94	M14	UCX13-208	FCX13	5.7
2-9/16 in (65.1 mm)	UCFCX13-209	194	165	116.7	11	16	20	33	53	140	75.4	74.6	30.2	94	M14	UCX13-209	FCX13	5.7
2-5/8 in (66.7 mm)	UCFCX14-210	222	190	134.4	14	19	20	36	56	164	78.5	77.8	33.3	100	M16	UCX14-210	FCX14	7.3
2-11/16 in (68.3 mm)	UCFCX14-211	222	190	134.4	14	19	20	36	56	164	78.5	77.8	33.3	100	M16	UCX14-211	FCX14	7.3
2-3/4 in (69.9 mm)	UCFCX14-212	222	190	134.4	14	19	20	36	56	164	78.5	77.8	33.3	100	M16	UCX14-212	FCX14	7.3
2-13/16 in (71.4 mm)	UCFCX15-213	222	190	134.4	12	19	22	35	57	164	83.3	82.6	33.3	105	M16	UCX15-213	FCX15	8
2-7/8 in (73 mm)	UCFCX15-214	222	190	134.4	12	19	22	35	57	164	83.3	82.6	33.3	105	M16	UCX15-214	FCX15	8
2-15/16 in (74.6 mm)	UCFCX15-215	222	190	134.4	12	19	22	35	57	164	83.3	82.6	33.3	105	M16	UCX15-215	FCX15	8
3 in (76.2 mm)	UCFCX15-300	222	190	134.4	12	19	22	35	57	164	83.3	82.6	33.3	105	M16	UCX15-300	FCX15	8
3-1/16 in (77.8 mm)	UCFCX16-301	260	219	154.9	10	23	25	36	61	186	86.6	85.7	34.1	113	M20	UCX16-301	FCX16	12
3-1/8 in (79.4 mm)	UCFCX16-302	260	219	154.9	10	23	25	36	61	186	86.6	85.7	34.1	113	M20	UCX16-302	FCX16	12
3-3/16 in (81 mm)	UCFCX16-303	260	219	154.9	10	23	25	36	61	186	86.6	85.7	34.1	113	M20	UCX16-303	FCX16	12
3-1/4 in (82.6 mm)	UCFCX16-304	260	219	154.9	10	23	25	36	61	186	86.6	85.7	34.1	113	M20	UC217-304	FCX16	12
3-5/16 in (84.1 mm)	UCFCX17-305	260	219	154.9	10	23	25	36	61	186	91.3	96	39.7	119	M20	UCX17-305	FCX17	12
3-7/16 in (87.3 mm)	UCFCX17-307	260	219	154.9	10	23	25	36	61	186	91.3	96	39.7	119	M20	UCX17-307	FCX17	12
3-7/16 in (87.3 mm)	UCFCX18-307	260	219	154.9	12	23	28	43	71	186	101.1	104	42.9	126	M20	UCX18-307	FCX18	12
3-1/2 in (88.9 mm)	UCFCX18-308	260	219	154.9	12	23	28	43	71	186	101.1	104	42.9	126	M20	UCX18-308	FCX18	12
3-13/16 in (96.8 mm)	UCFCX20-313	276	238	168.3	22	23	28	66	94	206	118.3	117.5	49.2	139	M20	UCX20-313	FCX20	18
3-7/8 in (98.4 mm)	UCFCX20-314	276	238	168.3	22	23	28	66	94	206	118.3	117.5	49.2	139	M20	UCX20-314	FCX20	18
3-15/16 in (100 mm)	UCFCX20-315	276	238	168.3	22	23	28	66	94	206	118.3	117.5	49.2	139	M20	UCX20-315	FCX20	18
4 in (101.6 mm)	UCFCX20-400	276	238	168.3	22	23	28	66	94	206	118.3	117.5	49.2	139	M20	UCX20-400	FCX20	18

Request Quote for UCFCX

Typical Applications

Applications needing a located bore fit
Machine frames and end plates
Fans and mixers
General industrial shafting

Other Flanged Units Series

UCF2 UCF3 UCFX UCFG2 UCFG3 UCFS3 UCFSG3 UCFC2 UCFL2 UCFL3 UCFLX UCFLG2 UCFLG3 F-UCFM2 UCFA2 UCFH2 ASFB2 UCFE2 ASPF2 ASRPF2 ASPFL2 ASRPFL2 UELFU2 UELF2 UELFLU2 UELFL2 AELFB2 AELPF2 JELPF2 AELRPF2 AELPFL2 AELRPFL2 JELPFL2

Frequently Asked Questions

What sizes are available in the UCFCX series?

UCFCX units are available from 25mm – 100mm bore, as listed in the dimension table below. Each size has its own part number for ordering.

What is the housing material and locking type for UCFCX?

UCFCX uses a cast iron housing with set screw locking, sourced from NTN, FAG, SKF, FYH, Asahi, DTC and SLS.

What is UCFCX typically used for?

Common applications include applications needing a located bore fit and machine frames and end plates, and similar general industrial shaft-support duties.

Can’t find your size?

We supply sizes, brands and special versions of mounted bearing units that are not listed on this page. Type the exact size or designation you need and send it to us for a quote.

Need pricing on UCFCX units?

Share your shaft size and quantity — our technical team will confirm availability and pricing within one business day.

Request Quote Call +91 8369255108