Flanged Units
JELPF2 Series Eccentric Collar Pressed Steel Round Flange Units (JEL)
Round flange housing that bolts against a flat machine face, with a eccentric locking collar insert bearing in a pressed steel housing. The eccentric locking collar grips the shaft by turning the collar, which suits shafts that run in one direction and need no set screws. Shaft sizes 12mm – 40mm; each size is listed with its dimensions below.
Dimensions & Part Numbers
| Shaft Dia. (mm) | Unit Number | H (mm) | J (Bolt Hole Spacing) (mm) | A1 (mm) | N (Bolt Hole Dia.) (mm) | A (mm) | B1 (Inner Ring Width) (mm) | S (mm) | H1 (mm) | Bolt Size | Bearing Insert No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 12 | JELPF201 | 81 | 63.5 | 4 | 7.1 | 14 | 28.6 | 6.5 | 49 | M6 | JEL201 |
| 15 | JELPF202 | 81 | 63.5 | 4 | 7.1 | 14 | 28.6 | 6.5 | 49 | M6 | JEL202 |
| 17 | JELPF203 | 81 | 63.5 | 4 | 7.1 | 14 | 28.6 | 6.5 | 49 | M6 | JEL203 |
| 20 | JELPF204 | 90 | 71.5 | 4 | 9 | 16 | 31 | 7.5 | 56 | M8 | JEL204 |
| 25 | JELPF205 | 95 | 76 | 4 | 9 | 18 | 31 | 7.5 | 60 | M8 | JEL205 |
| 30 | JELPF206 | 113 | 90.5 | 5.2 | 11 | 18 | 35.7 | 9 | 71 | M10 | JEL206 |
| 35 | JELPF207 | 122 | 100 | 5.2 | 11 | 20 | 38.9 | 9.5 | 81 | M10 | JEL207 |
| 40 | JELPF208 | 148 | 119 | 6.8 | 13.5 | 21 | 43.7 | 11 | 91 | M12 | JEL208 |
Dimensions and part numbers per manufacturer technical catalogue; confirm the exact unit and brand with us before ordering.
Inch Shaft Sizes
The same JELPF2 housings are also supplied with inch-bore insert bearings. The unit number carries a suffix for the shaft size (for example -104 is 1-1/4 inch), and the housing dimensions are the same as the metric unit in the table above.
| Shaft Dia. (in) | Unit Number | H (mm) | J (Bolt Hole Spacing) (mm) | A1 (mm) | N (Bolt Hole Dia.) (mm) | A (mm) | B1 (Inner Ring Width) (mm) | S (mm) | H1 (mm) | Bolt Size | Bearing Insert No. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 in (12.7 mm) | JELPF201-008 | 81 | 63.5 | 4 | 7.1 | 14 | 28.6 | 6.5 | 49 | M6 | JEL201-008 |
| 9/16 in (14.3 mm) | JELPF202-009 | 81 | 63.5 | 4 | 7.1 | 14 | 28.6 | 6.5 | 49 | M6 | JEL202-009 |
| 5/8 in (15.9 mm) | JELPF202-010 | 81 | 63.5 | 4 | 7.1 | 14 | 28.6 | 6.5 | 49 | M6 | JEL202-010 |
| 11/16 in (17.5 mm) | JELPF203-011 | 81 | 63.5 | 4 | 7.1 | 14 | 28.6 | 6.5 | 49 | M6 | JEL203-011 |
| 3/4 in (19.1 mm) | JELPF204-012 | 90 | 71.5 | 4 | 9 | 16 | 31 | 7.5 | 56 | M8 | JEL204-012 |
| 13/16 in (20.6 mm) | JELPF205-013 | 95 | 76 | 4 | 9 | 18 | 31 | 7.5 | 60 | M8 | JEL205-013 |
| 7/8 in (22.2 mm) | JELPF205-014 | 95 | 76 | 4 | 9 | 18 | 31 | 7.5 | 60 | M8 | JEL205-014 |
| 15/16 in (23.8 mm) | JELPF205-015 | 95 | 76 | 4 | 9 | 18 | 31 | 7.5 | 60 | M8 | JEL205-015 |
| 1 in (25.4 mm) | JELPF205-100 | 95 | 76 | 4 | 9 | 18 | 31 | 7.5 | 60 | M8 | JEL205-100 |
| 1-1/16 in (27 mm) | JELPF206-101 | 113 | 90.5 | 5.2 | 11 | 18 | 35.7 | 9 | 71 | M10 | JEL206-101 |
| 1-1/8 in (28.6 mm) | JELPF206-102 | 113 | 90.5 | 5.2 | 11 | 18 | 35.7 | 9 | 71 | M10 | JEL206-102 |
| 1-3/16 in (30.2 mm) | JELPF206-103 | 113 | 90.5 | 5.2 | 11 | 18 | 35.7 | 9 | 71 | M10 | JEL206-103 |
| 1-1/4 in (31.8 mm) | JELPF206-104 | 113 | 90.5 | 5.2 | 11 | 18 | 35.7 | 9 | 71 | M10 | JEL206-104 |
| 1-1/4 in (31.8 mm) | JELPF207-104 | 122 | 100 | 5.2 | 11 | 20 | 38.9 | 9.5 | 81 | M10 | JEL207-104 |
| 1-5/16 in (33.3 mm) | JELPF207-105 | 122 | 100 | 5.2 | 11 | 20 | 38.9 | 9.5 | 81 | M10 | JEL207-105 |
| 1-3/8 in (34.9 mm) | JELPF207-106 | 122 | 100 | 5.2 | 11 | 20 | 38.9 | 9.5 | 81 | M10 | JEL207-106 |
| 1-7/16 in (36.5 mm) | JELPF207-107 | 122 | 100 | 5.2 | 11 | 20 | 38.9 | 9.5 | 81 | M10 | JEL207-107 |
| 1-1/2 in (38.1 mm) | JELPF208-108 | 148 | 119 | 6.8 | 13.5 | 21 | 43.7 | 11 | 91 | M12 | JEL208-108 |
| 1-9/16 in (39.7 mm) | JELPF208-109 | 148 | 119 | 6.8 | 13.5 | 21 | 43.7 | 11 | 91 | M12 | JEL208-109 |
Typical Applications
- Compact machinery and equipment
- Light conveyors and rollers
- Agricultural and food equipment
- General light-duty shafting
Frequently Asked Questions
What sizes are available in the JELPF2 series?
JELPF2 units are available from 12mm – 40mm bore, as listed in the dimension table below. Each size has its own part number for ordering.
What is the housing material and locking type for JELPF2?
JELPF2 uses a pressed steel housing with eccentric locking collar locking, sourced from NTN, FAG, SKF, FYH, Asahi, DTC and SLS.
What is JELPF2 typically used for?
Common applications include compact machinery and equipment and light conveyors and rollers, and similar general industrial shaft-support duties.
Can’t find your size?
We supply sizes, brands and special versions of mounted bearing units that are not listed on this page. Type the exact size or designation you need and send it to us for a quote.
Need pricing on JELPF2 units?
Share your shaft size and quantity — our technical team will confirm availability and pricing within one business day.