Pillow Block Units

UELP3 Series Eccentric Collar Pillow Block Units (Heavy Series)

Name: Logass Trade Centre
Address: Room No. 36, 163 Narayan Dhuru Street, Maskati Building, 4th Floor, Mumbai, Maharashtra, 400003, IN
Telephone: +91 8369255108
Price range: ₹₹

Two-bolt pillow block housing that carries the shaft on a flat mounting surface, with a eccentric locking collar insert bearing in a cast iron housing. The eccentric locking collar grips the shaft by turning the collar, which suits shafts that run in one direction and need no set screws. Shaft sizes 25mm – 110mm; each size is listed with its dimensions below.

Bore range: 25mm – 110mmLocking type: Eccentric locking collarHousing: Cast ironBrands: NTN, FAG, SKF, FYH, Asahi, DTC, SLS

Dimensions & Part Numbers

Shaft Dia. (mm)	Unit Number	H (Shaft Centre Height) (mm)	L (Overall Length) (mm)	J (Bolt Hole Spacing) (mm)	A (mm)	N (Bolt Slot Width) (mm)	N1 (Bolt Slot Length) (mm)	H1 (mm)	H2 (mm)	L1 (mm)	B1 (Inner Ring Width) (mm)	S (mm)	Bolt Size
25	UELP305	45	175	132	45	17	20	15	85	54	46.8	16.7	M14
30	UELP306	50	180	140	50	17	20	18	95	54	50	17.5	M14
35	UELP307	56	210	160	56	17	25	20	106	60	51.6	18.3	M14
40	UELP308	60	220	170	60	17	27	22	116	60	57.1	19.8	M14
45	UELP309	67	245	190	67	20	30	24	129	65	58.7	19.8	M16
50	UELP310	75	275	212	75	20	35	27	143	75	66.6	24.6	M16
55	UELP311	80	310	236	80	20	38	30	154	85	73	27.8	M16
60	UELP312	85	330	250	85	25	38	32	165	95	79.4	30.95	M20
65	UELP313	90	340	260	90	25	38	33	176	105	85.7	32.55	M20
70	UELP314	95	360	280	90	27	40	35	187	105	92.1	34.15	M22
75	UELP315	100	380	290	100	27	40	35	198	110	100	37.3	M22
80	UELP316	106	400	300	110	27	40	40	210	110	106.4	40.5	M22
85	UELP317	112	420	320	110	33	45	40	220	120	109.5	42.05	M27
90	UELP318	118	430	330	110	33	45	45	235	120	115.9	43.65	M27
95	UELP319	125	470	360	120	36	50	45	250	125	122.3	38.9	M30
100	UELP320	140	490	380	120	36	50	50	275	130	128.6	50	M30
105	UELP321	140	490	380	120	36	50	50	280	130	139.7	48.4	M30
110	UELP322	150	520	400	140	40	55	55	300	135	141.3	49.2	M33

Dimensions and part numbers per manufacturer technical catalogue; confirm the exact unit and brand with us before ordering.

Inch Shaft Sizes

The same UELP3 housings are also supplied with inch-bore insert bearings. The unit number carries a suffix for the shaft size (for example -104 is 1-1/4 inch), and the housing dimensions are the same as the metric unit in the table above.

Shaft Dia. (in)	Unit Number	H (Shaft Centre Height) (mm)	L (Overall Length) (mm)	J (Bolt Hole Spacing) (mm)	A (mm)	N (Bolt Slot Width) (mm)	N1 (Bolt Slot Length) (mm)	H1 (mm)	H2 (mm)	L1 (mm)	B1 (Inner Ring Width) (mm)	S (mm)	Bolt Size
13/16 in (20.6 mm)	UELP305-013	45	175	132	45	17	20	15	85	54	46.8	16.7	M14
7/8 in (22.2 mm)	UELP305-014	45	175	132	45	17	20	15	85	54	46.8	16.7	M14
15/16 in (23.8 mm)	UELP305-015	45	175	132	45	17	20	15	85	54	46.8	16.7	M14
1 in (25.4 mm)	UELP305-100	45	175	132	45	17	20	15	85	54	46.8	16.7	M14
1-1/16 in (27 mm)	UELP306-101	50	180	140	50	17	20	18	95	54	50	17.5	M14
1-1/8 in (28.6 mm)	UELP306-102	50	180	140	50	17	20	18	95	54	50	17.5	M14
1-3/16 in (30.2 mm)	UELP306-103	50	180	140	50	17	20	18	95	54	50	17.5	M14
1-1/4 in (31.8 mm)	UELP307-104	56	210	160	56	17	25	20	106	60	51.6	18.3	M14
1-5/16 in (33.3 mm)	UELP307-105	56	210	160	56	17	25	20	106	60	51.6	18.3	M14
1-3/8 in (34.9 mm)	UELP307-106	56	210	160	56	17	25	20	106	60	51.6	18.3	M14
1-7/16 in (36.5 mm)	UELP307-107	56	210	160	56	17	25	20	106	60	51.6	18.3	M14
1-1/2 in (38.1 mm)	UELP308-108	60	220	170	60	17	27	22	116	60	57.1	19.8	M14
1-9/16 in (39.7 mm)	UELP308-109	60	220	170	60	17	27	22	116	60	57.1	19.8	M14
1-5/8 in (41.3 mm)	UELP309-110	67	245	190	67	20	30	24	129	65	58.7	19.8	M16
1-11/16 in (42.9 mm)	UELP309-111	67	245	190	67	20	30	24	129	65	58.7	19.8	M16
1-3/4 in (44.5 mm)	UELP309-112	67	245	190	67	20	30	24	129	65	58.7	19.8	M16
1-13/16 in (46 mm)	UELP310-113	75	275	212	75	20	35	27	143	75	66.6	24.6	M16
1-7/8 in (47.6 mm)	UELP310-114	75	275	212	75	20	35	27	143	75	66.6	24.6	M16
1-15/16 in (49.2 mm)	UELP310-115	75	275	212	75	20	35	27	143	75	66.6	24.6	M16
2 in (50.8 mm)	UELP311-200	80	310	236	80	20	38	30	154	85	73	27.8	M16
2-1/16 in (52.4 mm)	UELP311-201	80	310	236	80	20	38	30	154	85	73	27.8	M16
2-1/8 in (54 mm)	UELP311-202	80	310	236	80	20	38	30	154	85	73	27.8	M16
2-3/16 in (55.6 mm)	UELP311-203	80	310	236	80	20	38	30	154	85	73	27.8	M16
2-1/4 in (57.2 mm)	UELP312-204	85	330	250	85	25	38	32	165	95	79.4	30.95	M20
2-5/16 in (58.7 mm)	UELP312-205	85	330	250	85	25	38	32	165	95	79.4	30.95	M20
2-3/8 in (60.3 mm)	UELP312-206	85	330	250	85	25	38	32	165	95	79.4	30.95	M20
2-7/16 in (61.9 mm)	UELP312-207	85	330	250	85	25	38	32	165	95	79.4	30.95	M20
2-1/2 in (63.5 mm)	UELP313-208	90	340	260	90	25	38	33	176	105	85.7	32.55	M20
2-9/16 in (65.1 mm)	UELP313-209	90	340	260	90	25	38	33	176	105	85.7	32.55	M20
2-5/8 in (66.7 mm)	UELP314-210	95	360	280	90	27	40	35	187	105	92.1	34.15	M22
2-11/16 in (68.3 mm)	UELP314-211	95	360	280	90	27	40	35	187	105	92.1	34.15	M22
2-3/4 in (69.9 mm)	UELP314-212	95	360	280	90	27	40	35	187	105	92.1	34.15	M22
2-13/16 in (71.4 mm)	UELP315-213	100	380	290	100	27	40	35	198	110	100	37.3	M22
2-7/8 in (73 mm)	UELP315-214	100	380	290	100	27	40	35	198	110	100	37.3	M22
2-15/16 in (74.6 mm)	UELP315-215	100	380	290	100	27	40	35	198	110	100	37.3	M22
3 in (76.2 mm)	UELP315-300	100	380	290	100	27	40	35	198	110	100	37.3	M22
3-1/16 in (77.8 mm)	UELP316-301	106	400	300	110	27	40	40	210	110	106.4	40.5	M22
3-1/8 in (79.4 mm)	UELP316-302	106	400	300	110	27	40	40	210	110	106.4	40.5	M22
3-3/16 in (81 mm)	UELP316-303	106	400	300	110	27	40	40	210	110	106.4	40.5	M22
3-1/4 in (82.6 mm)	UELP317-304	112	420	320	110	33	45	40	220	120	109.5	42.05	M27
3-5/16 in (84.1 mm)	UELP317-305	112	420	320	110	33	45	40	220	120	109.5	42.05	M27
3-7/16 in (87.3 mm)	UELP317-307	112	420	320	110	33	45	40	220	120	109.5	42.05	M27
3-7/16 in (87.3 mm)	UELP318-307	118	430	330	110	33	45	45	235	120	115.9	43.65	M27
3-1/2 in (88.9 mm)	UELP318-308	118	430	330	110	33	45	45	235	120	115.9	43.65	M27
3-5/8 in (92.1 mm)	UELP319-310	125	470	360	120	36	50	45	250	125	122.3	38.9	M30
3-11/16 in (93.7 mm)	UELP319-311	125	470	360	120	36	50	45	250	125	122.3	38.9	M30
3-3/4 in (95.3 mm)	UELP319-312	125	470	360	120	36	50	45	250	125	122.3	38.9	M30
3-13/16 in (96.8 mm)	UELP320-313	140	490	380	120	36	50	50	275	130	128.6	50	M30
3-7/8 in (98.4 mm)	UELP320-314	140	490	380	120	36	50	50	275	130	128.6	50	M30
3-15/16 in (100 mm)	UELP320-315	140	490	380	120	36	50	50	275	130	128.6	50	M30
4 in (101.6 mm)	UELP320-400	140	490	380	120	36	50	50	275	130	128.6	50	M30

Request Quote for UELP3

Typical Applications

Conveyors and material handling shafts
Fans, blowers and pumps
Agricultural and food-processing machinery
General industrial shaft support

Other Pillow Block Units Series

UCP2 UCP3 UCPX UCPL2 UCPG2 UCPG3 F-UCPM2 F-UCPR2 UCIP2 UCIP3 UCHP2 UCUP2 ASPB2 UCPE2 ASPL2 ASPP2 ASRPP2 UELP2 UELPL2 UELHP2 AELPL2 JELPL2 AELPB2 AELPP2 AELRPP2

Frequently Asked Questions

What sizes are available in the UELP3 series?

UELP3 units are available from 25mm – 110mm bore, as listed in the dimension table below. Each size has its own part number for ordering.

What is the housing material and locking type for UELP3?

UELP3 uses a cast iron housing with eccentric locking collar locking, sourced from NTN, FAG, SKF, FYH, Asahi, DTC and SLS.

What is UELP3 typically used for?

Common applications include conveyors and material handling shafts and fans, blowers and pumps, and similar general industrial shaft-support duties.

Can’t find your size?

We supply sizes, brands and special versions of mounted bearing units that are not listed on this page. Type the exact size or designation you need and send it to us for a quote.

Need pricing on UELP3 units?

Share your shaft size and quantity — our technical team will confirm availability and pricing within one business day.

Request Quote Call +91 8369255108