Cartridge Units
UCCX Series Cartridge Units (X Series)
Cylindrical cartridge housing that slides into a bored or fabricated mounting, with a set screw insert bearing in a cast iron housing. Shaft sizes 25mm – 60mm; each size is listed with its dimensions below.
Dimensions & Part Numbers
| Shaft Dia. (mm) | Unit Number | H (mm) | A (mm) | r (mm) | B (Inner Ring Width) (mm) | S (mm) | Bearing Insert No. |
|---|---|---|---|---|---|---|---|
| 25 | UCCX05 | 90 | 27 | 2 | 38.1 | 15.9 | UCX05 |
| 30 | UCCX06 | 100 | 30 | 2.5 | 42.9 | 17.5 | UCX06 |
| 35 | UCCX07 | 110 | 34 | 2.5 | 49.2 | 19 | UCX07 |
| 40 | UCCX08 | 120 | 38 | 2.5 | 49.2 | 19 | UCX08 |
| 45 | UCCX09 | 120 | 38 | 2.5 | 51.6 | 19 | UCX09 |
| 50 | UCCX10 | 130 | 40 | 2.5 | 55.6 | 22.2 | UCX10 |
| 55 | UCCX11 | 150 | 42 | 3 | 65.1 | 25.4 | UCX11 |
| 60 | UCCX12 | 160 | 44 | 3 | 65.1 | 25.4 | UCX12 |
Dimensions and part numbers per manufacturer technical catalogue; confirm the exact unit and brand with us before ordering.
Inch Shaft Sizes
The same UCCX housings are also supplied with inch-bore insert bearings. The unit number carries a suffix for the shaft size (for example -104 is 1-1/4 inch), and the housing dimensions are the same as the metric unit in the table above.
| Shaft Dia. (in) | Unit Number | H (mm) | A (mm) | r (mm) | B (Inner Ring Width) (mm) | S (mm) | Bearing Insert No. |
|---|---|---|---|---|---|---|---|
| 13/16 in (20.6 mm) | UCCX05-013 | 90 | 27 | 2 | 38.1 | 15.9 | UCX05-013 |
| 7/8 in (22.2 mm) | UCCX05-014 | 90 | 27 | 2 | 38.1 | 15.9 | UCX05-014 |
| 15/16 in (23.8 mm) | UCCX05-015 | 90 | 27 | 2 | 38.1 | 15.9 | UCX05-015 |
| 1 in (25.4 mm) | UCCX05-100 | 90 | 27 | 2 | 38.1 | 15.9 | UCX05-100 |
| 1-1/16 in (27 mm) | UCCX06-101 | 100 | 30 | 2.5 | 42.9 | 17.5 | UCX06-101 |
| 1-1/8 in (28.6 mm) | UCCX06-102 | 100 | 30 | 2.5 | 42.9 | 17.5 | UCX06-102 |
| 1-3/16 in (30.2 mm) | UCCX06-103 | 100 | 30 | 2.5 | 42.9 | 17.5 | UCX06-103 |
| 1-1/4 in (31.8 mm) | UCCX06-104 | 100 | 30 | 2.5 | 42.9 | 17.5 | UC207-104 |
| 1-5/16 in (33.3 mm) | UCCX07-105 | 110 | 34 | 2.5 | 49.2 | 19 | UCX07-105 |
| 1-3/8 in (34.9 mm) | UCCX07-106 | 110 | 34 | 2.5 | 49.2 | 19 | UCX07-106 |
| 1-7/16 in (36.5 mm) | UCCX07-107 | 110 | 34 | 2.5 | 49.2 | 19 | UCX07-107 |
| 1-1/2 in (38.1 mm) | UCCX08-108 | 120 | 38 | 2.5 | 49.2 | 19 | UCX08-108 |
| 1-9/16 in (39.7 mm) | UCCX08-109 | 120 | 38 | 2.5 | 49.2 | 19 | UCX08-109 |
| 1-5/8 in (41.3 mm) | UCCX09-110 | 120 | 38 | 2.5 | 51.6 | 19 | UCX09-110 |
| 1-11/16 in (42.9 mm) | UCCX09-111 | 120 | 38 | 2.5 | 51.6 | 19 | UCX09-111 |
| 1-3/4 in (44.5 mm) | UCCX09-112 | 120 | 38 | 2.5 | 51.6 | 19 | UCX09-112 |
| 1-13/16 in (46 mm) | UCCX09-113 | 120 | 38 | 2.5 | 51.6 | 19 | UC210-113 |
| 1-7/8 in (47.6 mm) | UCCX10-114 | 130 | 40 | 2.5 | 55.6 | 22.2 | UCX10-114 |
| 1-15/16 in (49.2 mm) | UCCX10-115 | 130 | 40 | 2.5 | 55.6 | 22.2 | UCX10-115 |
| 2 in (50.8 mm) | UCCX10-200 | 130 | 40 | 2.5 | 55.6 | 22.2 | UC211-200 |
| 2-1/16 in (52.4 mm) | UCCX11-201 | 150 | 42 | 3 | 65.1 | 25.4 | UCX11-201 |
| 2-1/8 in (54 mm) | UCCX11-202 | 150 | 42 | 3 | 65.1 | 25.4 | UCX11-202 |
| 2-3/16 in (55.6 mm) | UCCX11-203 | 150 | 42 | 3 | 65.1 | 25.4 | UCX11-203 |
| 2-1/4 in (57.2 mm) | UCCX11-204 | 150 | 42 | 3 | 65.1 | 25.4 | UC212-204 |
| 2-5/16 in (58.7 mm) | UCCX11-205 | 150 | 42 | 3 | 65.1 | 25.4 | UC212-205 |
| 2-3/8 in (60.3 mm) | UCCX12-206 | 160 | 44 | 3 | 65.1 | 25.4 | UCX12-206 |
| 2-7/16 in (61.9 mm) | UCCX12-207 | 160 | 44 | 3 | 65.1 | 25.4 | UCX12-207 |
Typical Applications
- Tube or pipe-stand mounted shafts
- Rollers and idlers
- Agricultural implements
- Compact drives needing a cylindrical fit
Frequently Asked Questions
What sizes are available in the UCCX series?
UCCX units are available from 25mm – 60mm bore, as listed in the dimension table below. Each size has its own part number for ordering.
What is the housing material and locking type for UCCX?
UCCX uses a cast iron housing with set screw locking, sourced from NTN, FAG, SKF, FYH, Asahi, DTC and SLS.
What is UCCX typically used for?
Common applications include tube or pipe-stand mounted shafts and rollers and idlers, and similar general industrial shaft-support duties.
Can’t find your size?
We supply sizes, brands and special versions of mounted bearing units that are not listed on this page. Type the exact size or designation you need and send it to us for a quote.
Need pricing on UCCX units?
Share your shaft size and quantity — our technical team will confirm availability and pricing within one business day.